aluminum motor housing enclosure

The materials selected for aluminum motor housing enclosure have high requirements on mechanical properties, formability, corrosion resistance, fatigue resistance, and welding performance. At present, the 6063 alloys in the national standard GB/T3190 are widely used, and it is formed by hot extrusion through an aluminum alloy extruder.

aluminum motor housing enclosure, according to the production drawings and process dimensions of the product, firstly carry out sawing processing and then enter the machining section.

In the machining process of ALUMINUM MOTOR HOUSING ENCLOSURE, since there is no special machining center at present, only ordinary lathes with high precision are used for machining.

The machining process is to first turn the two ends of the aluminum motor housing enclosure, respectively, and then to process the two ends of the ALUMINUM MOTOR HOUSING ENCLOSURE.

The ALUMINUM MOTOR HOUSING ENCLOSURE processing tool can be clamped to the aluminum motor housing enclosure through the combination of the tapered tube and the tapered block, which can realize two operations in one clamping.

End face processing and aluminum motor housing enclosure processing of both ends of the mouth, improve the production efficiency by more than double.

aluminum motor housing enclosure processing tooling can complete the processing of both ends of the aluminum alloy motor shell, avoiding the need for two clamping to the aluminum alloy motor.

The influence of the parallelism of the shell improves the machining accuracy, improves the machining quality of the aluminum alloy motor shell, and avoids the use of the aluminum alloy motor shell motor during the use process.

Sweep and noise are produced.